Innovate Motorsports LM-2 Single Channel BASIC Wideband Kit - IN3837

  • Sale
  • Regular price £328.31
  • Get Pre-Approved

    Fast check - won't affect your credit rating



LM-2: Digital Air/Fuel Ratio Meter

NEW!!! The new LM-2 "Basic" Kit (Single Wideband O2) ONLY includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide.

*Note: The LM-2 "Basic" Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM, or to Output the wideband signal to an external device you'll need the LM-2 Analog IN/OUT Cable (P/N: 3811) optional accessory.

For OBD-II features you'll need the LM-2 OBD-II Cable (P/N: 3809) optional accessory.

To record internally to your LM-2 you'll need the SD Card (P/N: 3787) optional accessory.

This unit also comes in a cardboard box, the black hard case is an optional accessory LM-2 Carrying Case (P/N: 3836)*

SINGLE CHANNEL BASIC MODEL The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

Patented “Direct Digital” Wideband Technology Wideband O2 Compatible with ALL fuel types

Single Channel Version

OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data WITH OPTIONAL CABLE

Log to SD card WITH OPTIONAL EXTRA Playback log data on screen and/or with powerful LogWorks software (included) Large high-contrast graphics LCD

Built-in RPM converter (direct frequency or with optional inductive clamp)

4 fully-differential analog inputs 2 configurable linear analog outputs

Positive lock connectors for all connections Innovate MTS serial IN and OUT

USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR.

With the provided LM Programmer software these analog outputs may also be configured by the user.

This is the SINGLE CHANNEL BASIC KIT - Innovate Part Number IN3837